<p data-start="0" data-end="59"><strong data-start="0" data-end="59">Subaru Rear Camber Bolts for Accurate Wheel Positioning

<p data-start="61" data-end="608">When it comes to fine-tuning a Subaru's suspension system, one of the most crucial adjustments that can improve both handling and tire wear is rear camber. Specifically, Subaru owners often use <strong data-start="255" data-end="276">rear camber bolts to achieve precise wheel alignment, ensuring that the vehicle performs optimally, whether on the street, in daily driving conditions, or on the track. These simple but effective components are key to enhancing your vehicle&rsquo;s overall driving experience, and understanding how and why to use them is essential for Subaru enthusiasts. subaru rear camber bolts

<p data-start="610" data-end="894">This article explores what rear camber bolts are, why they are essential for accurate wheel positioning, and how they can benefit your Subaru. We will also discuss the installation process and how adjusting rear camber can improve handling, tire wear, and overall vehicle performance.

<h3 data-start="896" data-end="927">What are Rear Camber Bolts?</h3>
<p data-start="929" data-end="1283">At the most basic level, <strong data-start="954" data-end="964">camber refers to the angle of the wheels in relation to the vertical axis of the car when viewed from the front or rear. More specifically, camber is the tilt of the wheels from top to bottom. This angle significantly impacts how the tires contact the road and, consequently, the vehicle's handling, stability, and tire wear.

<p data-start="1285" data-end="1678">When it comes to <strong data-start="1302" data-end="1323">rear camber bolts, they are specialized fasteners designed to adjust the camber angle in the rear suspension of the vehicle. These bolts replace the factory-installed suspension bolts, and their eccentric (off-center) design allows the user to shift the suspension components slightly, altering the camber angle without the need for replacing the entire suspension system.

<p data-start="1680" data-end="2070">In simpler terms, rear camber bolts allow for fine-tuned adjustments to the rear wheel alignment, which is crucial for performance vehicles like Subarus that see significant driving under varying conditions. They provide the flexibility to change the camber from stock settings to those that improve handling and tire wear, especially when modifications, such as lowering the car, are made.

<h3 data-start="2072" data-end="2100">Why is Camber Important?</h3>
<p data-start="2102" data-end="2258">Camber plays a significant role in how a vehicle handles and how its tires wear over time. Here&rsquo;s why adjusting the rear camber on your Subaru is important:

<h4 data-start="2260" data-end="2292">1. <strong data-start="2268" data-end="2292">Handling Performance</h4>
<p data-start="2294" data-end="2593">Camber affects how the tires interact with the road during cornering. When a vehicle turns, the body of the car leans to the outside of the curve, which can cause the inner or outer part of the tire to lose contact with the road. This results in reduced grip and control during high-speed cornering.

<p data-start="2595" data-end="3091">A slight negative camber, where the top of the wheel tilts inward, helps the tires maintain more consistent contact with the road during turns. This is because the camber angle allows the inside of the tire to remain perpendicular to the road during hard cornering, resulting in a larger contact patch and better grip. For Subaru owners, particularly those with performance models like the WRX or STI, achieving proper rear camber alignment is vital for improving handling, especially in corners.

<h4 data-start="3093" data-end="3114">2. <strong data-start="3101" data-end="3114">Tire Wear</h4>
<p data-start="3116" data-end="3511">Improper camber can lead to uneven tire wear. If the camber angle is too extreme, the tires may wear excessively on one side. For example, excessive negative camber can cause the inner edges of the tires to wear faster than the rest of the tire tread. This not only reduces the lifespan of the tires but also affects overall performance, as uneven tire wear can cause poor traction and handling.

<p data-start="3513" data-end="3816">Rear camber bolts allow for precise adjustments to the camber angle, helping to ensure more even tire wear. This is especially crucial for Subarus that are lowered or modified, as adjusting the camber ensures that the tires wear evenly across the tread, improving tire longevity and overall performance.

<h4 data-start="3818" data-end="3847">3. <strong data-start="3826" data-end="3847">Vehicle Stability</h4>
<p data-start="3849" data-end="4279">In addition to improving handling, adjusting rear camber can also enhance the overall stability of the vehicle. If the camber is incorrectly aligned, it can lead to instability, especially during high-speed driving or on uneven roads. Proper rear camber alignment ensures that all four tires have optimal contact with the road, contributing to better stability, traction, and control, whether you're driving straight or cornering.

<h4 data-start="4281" data-end="4314">4. <strong data-start="4289" data-end="4314">Improved Ride Quality</h4>
<p data-start="4316" data-end="4674">A proper camber alignment can also improve the ride quality, especially for those who have lowered their Subaru. Lowering the vehicle affects the suspension geometry, often leading to increased negative camber. While a small amount of negative camber can improve cornering, too much of it can result in instability, poor tire contact, and rough ride quality.

<p data-start="4676" data-end="4999">Rear camber bolts can be used to dial in the perfect amount of camber adjustment, ensuring that the car handles well without sacrificing ride comfort. This is particularly important for daily drivers or anyone who drives on mixed road conditions, as it keeps the vehicle stable and smooth while still enhancing performance.

<h3 data-start="5001" data-end="5054">When Should You Consider Using Rear Camber Bolts?</h3>
<p data-start="5056" data-end="5146">Using rear camber bolts becomes especially important under certain circumstances, such as:

<h4 data-start="5148" data-end="5186">1. <strong data-start="5156" data-end="5186">After Lowering Your Subaru</h4>
<p data-start="5188" data-end="5524">One of the most common reasons Subaru owners install rear camber bolts is when they lower their vehicles. Lowering a car alters the suspension geometry, often resulting in more negative camber. While a small amount of negative camber can improve cornering, excessive negative camber causes uneven tire wear and affects overall handling.

<p data-start="5526" data-end="5812">If you've lowered your Subaru for performance or aesthetic reasons, rear camber bolts will help you adjust the camber to ensure proper alignment. This adjustment allows you to maintain better tire contact with the road, ensuring that the car handles optimally and the tires wear evenly.

<h4 data-start="5814" data-end="5849">2. <strong data-start="5822" data-end="5849">For Performance Driving</h4>
<p data-start="5851" data-end="6232">If you use your Subaru for track days, autocross, or other forms of motorsport, achieving the proper camber angle is crucial. Track driving places much higher demands on a vehicle&rsquo;s suspension, especially when cornering at high speeds. Negative camber improves the grip and stability of the vehicle during sharp turns, providing a more responsive and controlled driving experience.

<p data-start="6234" data-end="6463">Rear camber bolts give you the flexibility to adjust the camber for performance driving, making sure that the rear wheels maintain optimal grip on the track. This can contribute to faster lap times and better overall performance.

<h4 data-start="6465" data-end="6516">3. <strong data-start="6473" data-end="6516">If You're Experiencing Uneven Tire Wear</h4>
<p data-start="6518" data-end="6814">If you notice uneven tire wear, particularly on the inside or outside edges of the rear tires, it&rsquo;s a sign that your camber is out of alignment. Adjusting the rear camber using rear camber bolts can help correct this issue, leading to more even tire wear and extending the lifespan of your tires.

<h4 data-start="6816" data-end="6868">4. <strong data-start="6824" data-end="6868">For Suspension Upgrades or Modifications</h4>
<p data-start="6870" data-end="7303">When you modify the suspension of your Subaru, whether by upgrading shocks and struts, installing coilovers, or replacing other suspension components, the alignment may need to be adjusted. Rear camber bolts are an ideal solution for re-aligning the camber and ensuring the suspension works as intended. Whether you're installing a full suspension kit or making smaller tweaks, camber bolts help maintain optimal suspension geometry.

<h3 data-start="7305" data-end="7356">How to Install Rear Camber Bolts on Your Subaru</h3>
<p data-start="7358" data-end="7530">Installing rear camber bolts is a relatively straightforward process, though it does require a bit of mechanical know-how. Here&rsquo;s an overview of how the installation works:

<ol data-start="7532" data-end="9099">
<li data-start="7532" data-end="7730">
<p data-start="7535" data-end="7730"><strong data-start="7535" data-end="7555">Lift the Vehicle: Begin by safely lifting the rear of your Subaru using a jack and supporting the vehicle with jack stands. Remove the rear wheels to gain access to the suspension components.

</li>
<li data-start="7732" data-end="8004">
<p data-start="7735" data-end="8004"><strong data-start="7735" data-end="7762">Locate the Camber Bolts: The rear camber bolts are typically located on the rear suspension's control arms. These bolts connect the control arm to the chassis, and by replacing the stock bolts with adjustable camber bolts, you can fine-tune the suspension geometry.

</li>
<li data-start="8006" data-end="8245">
<p data-start="8009" data-end="8245"><strong data-start="8009" data-end="8038">Remove the Existing Bolts: Use a wrench or socket set to remove the stock bolts from the control arm. Take care to note the position and orientation of the bolts, as you'll need to install the new camber bolts in the same locations.

</li>
<li data-start="8247" data-end="8520">
<p data-start="8250" data-end="8520"><strong data-start="8250" data-end="8283">Install the Rear Camber Bolts: Install the new camber bolts in the same position as the old ones. These eccentric bolts have a slightly off-center design that allows for adjustments to the camber angle. Tighten them to the manufacturer&rsquo;s recommended torque settings.

</li>
<li data-start="8522" data-end="8785">
<p data-start="8525" data-end="8785"><strong data-start="8525" data-end="8546">Adjust the Camber: Once the camber bolts are installed, you can adjust the camber angle by rotating the eccentric bolt. You may need to use a camber gauge or take your car to an alignment shop to ensure that the camber is set to the desired specifications.

</li>
<li data-start="8787" data-end="9099">
<p data-start="8790" data-end="9099"><strong data-start="8790" data-end="8829">Reinstall the Wheels and Test Drive: After making the necessary adjustments, reinstall the rear wheels, lower the vehicle, and take it for a test drive. Pay attention to how the car handles and feel for any signs of instability. If necessary, make additional adjustments to fine-tune the camber alignment.

</li>
</ol>
<h3 data-start="9101" data-end="9115">Conclusion</h3>
<p data-start="9117" data-end="9548">Rear camber bolts are an excellent solution for Subaru owners who want to optimize their vehicle&rsquo;s alignment, handling, and tire wear. Whether you&rsquo;re looking to improve cornering grip, enhance ride quality, or extend the life of your tires, adjusting the camber is a vital modification. Rear camber bolts allow for precise adjustments to the rear suspension, ensuring that your Subaru performs at its best under various conditions.



<p data-start="9550" data-end="9911" data-is-last-node="" data-is-only-node="">For those who&rsquo;ve lowered their car, participate in motorsports, or are simply looking for better handling and tire wear, rear camber bolts are a must-have modification. Installing these bolts and making the necessary adjustments ensures that your Subaru handles optimally and provides the best possible driving experience, whether on the street or on the track.